I bought this fabric when I was in India a few years ago. That fabric shopping trip was overwhelming, and I have no idea what I was thinking when I chose most of the fabrics. I got home and discovered that I did not like most of them!
This fabric, though, I still liked. It was just different enough to not be like everything else I own, but still within my favorite colors. It was a drapey, sort of twill weave but turned out it was VERY loosely woven and in fact basically unraveled the second I cut it into the pieces. I quickly ran each edge through the serger but apparently that was only somewhat successful because after a day of wearing it, there is a hole in the armpit. I sewed that shut and after another wearing and a trip through the wash, there’s the beginning of a hole at one shoulder seam. Those seams were sewn with proper seam allowance; I think the fabric is just too fragile!
Sadly I think this one will never be worn again. But I proudly wore it for one fine spring day on a drive with a friend from LA to San Diego! It’s shown here under the pier at Newport Beach and on the rocks around Laguna beach.
When I graduated from high school 20-plus years ago, I was given a terrycloth robe. It came greatly in handy in college, when I lived in the dorm and would travel back and forth down the hall to the bathroom. But once I started living on my own, I stopped using it—I went from bathroom to dressed, with no stop in between. But the past few years, I’ve taken to showering upon getting home from the day in the summer. Sweaty, salty, and covered in a layer of whatever hangs in the air in the subway, the end-of-day shower is one of my favorite parts of summer. And sometimes after one of them, I just don’t want to put clothing on right away. I kept wanting a robe.
Enter Purl Soho’s free pattern, Women’s Robe. (Well, free if you sign up for their newsletter.) I went to Mood, which has a bunch of Liberty cotton lawn, and agonized over the choices. In general I’m not hugely into the tiny florals of Liberty, but I wanted a super special robe, and this gray/white/blue one was the one. (There are tiny tiny bits of blue.)
The pattern is very very basic—rectangles sewn together, essentially. It is not even a PDF pattern; it comes with no pattern pieces, instead telling you to cut rectangles of certain dimensions. That put a big delay in my process, because I knew the best way to ensure I had everything square was to make the pattern pieces. (I’m so glad I did not pay for this pattern. I’d be incredibly disappointed in how little I got for the money.) I finally sat down one day and did the math to make it work with 8½ x 11 paper. When I cut the fabric out I was highly conservative with the fabric and had enough leftover to make a shirt! And I even did the long length—it comes to mid-shin.
Of course, even though it’s fall I’ve been loving using the robe. After a shower I don it, put my hair up in my towel, and feel free to swan about for a bit before I eventually put some clothes on.
Right before heading to the TNNA summer tradeshow, I finished sewing my first Adelaide Dress from Seamwork Magazine, and I wore it on the first day of the show! I proudly marched over to the Knitter’s Pride booth to show it off, because I purchased this fabric while on the trip to India to see Knitter’s Pride’s factory.
The fabric is a thin lightweight cotton, so this dress was perfect for the 94° day in DC, though it is so thin that I needed to buy a new white slip to wear under. I aligned the pattern so that the same lighter band goes up the very middle of the back, too. The directions for the dress and the sewing of it were incredibly straightforward—not once did I have to run to Google for help with terminology! Could be that I’ve gotten better at this, could just be that the directions were so clear. I cut a size 12 because I wanted some extra room in the bust and waist, and I’m happy with the result because there is no pulling across the bust at all.
Hammering on the snaps was by far my favorite part. I went to Snap Source‘s site and ordered 20 size 14 snaps along with the Snap Setter for that size, and they arrived very quickly. I’d been concerned when reading the website that size 14 snaps (“Suggested uses: Infant wear, doll clothing”) would be flimsy, but that’s what the pattern called for so I didn’t question it. Plus that size has a lot more color options, and if I were committing to the setter in that size I figured it was more versatile. I shouldn’t have been concerned: the snaps are so solid I find it hard to snap and unsnap them! (Luckily I can just pull the dress over my head.) I got white snaps, which you can just barely make out—sorry, no close-ups because Caro, Pam, and I were hot and I was in a rush—and only messed up one of them! I accidentally put the connection piece upside down on one. That snap was ruined in the process but the fabric wasn’t, so it was easy to just affix a new one.
I made the bias binding for inside the neck and armholes from white cotton batiste in my stash, and I made a TON of it so hopefully future garments will go more quickly than this one! The Seamwork estimated time for this is 3 hours. It took me far longer with that long break to make bias binding! But I don’t mind one bit, and I feel certain future versions (there will be future versions) will not take me nearly as long.
Big thanks to Caro for taking these pictures for me.
This was a discouraging post to write, because it marks the last garment I sewed before my sewing machine crapped out on me. It had been fussing at me for a while, giving an error for phantom reasons. I could often clear the glitch with a few hand-cranks and it would work for a short while more before beeping madly at me again. But while topstitching the belt—the longest continuous seam in the entire garment!—it got angrier than ever before, and I honestly doubted I’d be able to get through it without hand-cranking the entire thing. I took the machine into a repair shop, and I was told the day we took these pictures that the motherboard was shot and not worth replacing in my inexpensive machine (the Brother CS-6000i; it was about 6 years old with moderate use). So I’m sewing machine shopping! I have my eye on a few machines but still need to get somewhere to try them out. Suggestions?
Sometimes after I knit something I just immediately cast on for another of it, with whatever yarn is handy. Occasionally I finish those idle repeats—more often they end up unfinished. But after finishing a sweater for myself (that I’ve yet to properly photograph!) in Malabrigo Rastita, I had a decent amount of yarn leftover, and I thought my favorite kiddo needed a new winter hat.
This kid. He’s been taught to call me “Aunt Erin,” but for a while there this winter, he would refer to me only as “Not Aunt Holly.” What a stinker.
But still, I knit him a hat. I gave it to him while we were out at a party, and he refused to put it on while there. Apparently though, later, upon getting home, he put it on and declared “I am Aunt Erin”! I’ll take it!
I don’t have much else to say about the hat, which I really love and I think looks great in this yarn—photos taken by his skilled photographer mom—because I honestly don’t remember. I think I applied many of the same guesses that I did for the red hat I posted about the other day (or did I knit this one first? I swear I do not remember). I’m sure that I employed short rows rather than working garter in the round with purls, because I’m lazy, but I couldn’t tell you my stitch count or needle size. I suppose when I go to knit more before this coming winter I’ll just do the math again!
I’ve really been on a stockinette kick of late. This time, put to good use in a hat for Jason that I knit last fall. Cast on, worked k2,p2 rib for a bit, switched to stockinette, decreased in quarters. Not much more to say! The yarn spoke for itself—any stitch pattern seemed unnecessary with the lovely mottle that the Skeinny Dipping Yarn (in worsted) had.
His only requirement for knit hats is that they can cover his ears. I guess because he wears a hat every day as it is, the only reason to switch to a handknit is to get that extra coverage. I don’t think this hat is especially warm, but hopefully it’ll get some use.